Detergents and Disinfectants
Salle blanche16.11.2026
Keeping a cleanroom under control relies on using the right products at the right times:
- Detergents: Remove soiling before disinfecting (Clean)
- Disinfectant: Kill microbes (Disinfect)
- Sporicide: Kill spores (Deep Disinfect)
- Alcohol: Fast, frequent in-process disinfection (Rapid Disinfect)
This approach supports compliance with EU GMP Annex 1 and ISO 14644.
Detergents (Step 1: Cleaning)
- Used to clean surfaces and remove soiling, particles and residues before disinfection
- Helps lower contamination so disinfectants are more effective
- They do not kill microbes (they have no biocidal actives)
- The Surfactants lift soiling and the Wiping/Mopping physically removes it
- Used daily or as needed
Disinfectants (Step 2: Microbial Control)
- Reduces microbes to a safe level
- Different actives target different types of organisms
- Tested against bacteria, yeasts, moulds and viruses
- Must comply with Biocidal Products Regulation (BPR) in the EU or UK
What does a good cleaning program include?
- Clean first with an appropriate detergent
- Use a broad-spectrum disinfectant for routine control
- Rotate disinfectants with different modes of action
- Use sporicides periodically to eliminate resistant organisms/spores
- Use alcohols frequently for rapid in-process disinfection
- Validate and monitor the cleaning system to prove ongoing control
What is the difference between Disinfection and Sterilisation?
- Disinfection reduces microbes
- Sterilisation kills all microbes (e.g. autoclave, gamma irradiation). Disinfectants do not sterilise
What are the types of Disinfectants?
Broad-Spectrum Disinfectants (Routine Use)
- Kill: bacteria, yeasts, moulds, enveloped viruses
- Common ingredients: QACs (quaternary ammonium compounds), Triamines, Low-level peroxide or chlorine
- Benefits: Good overall efficacy, Compatible with many surfaces, Low odour, Low residue, Non-flammable
- Limitations: Not sporicidal, Can leave some residue, Can take longer to dry
- Notes: Rotation with another disinfectant with a different mode of action is recommended
Alcohols (Fast, In-Process Use)
Typically, 70% IPA or 70% IMS (denatured ethanol)
- Benefits: Very fast acting, Quick drying, Low residue
- Best for: Gloves, Work surfaces, Material transfer points
- Limitations: Not effective against spores, Limited activity against fungi and some viruses, Evaporates quickly so may not achieve full contact time, Highly flammable, Workplace exposure limits restrict use on large areas (e.g., floors)
Sporicides (High-Level / Periodic Use/ Deep Disinfection)
- Kill: Bacterial spores (the toughest form of microbes)
- Benefits: Full spectrum activity (bacteria, fungi, viruses, spores)
- Common ingredients: Hydrogen peroxide, Peracetic acid, Hypochlorite’s / hypochlorous acid
- Frequency: Monthly rotation, After contamination events, After maintenance or shutdowns
- Limitations: More hazardous, Corrosive to surfaces, Often leaves residue which require rinsing
TKN04: Detergents and Disinfectants by Tasmin Crompton - Technical Lead