Skip to main content

Alcohol Water Mixtures

Alcohol Water Mixtures 13.11.2026

Why are alcohol and water disinfectants unusual?

  • When alcohols (such as ethanol or isopropyl alcohol) are mixed with water, the final volume is always slightly less than the two volumes added together.
  • For example: 700ml of ethanol + 300ml of water, does not equal 1000ml once mixed.
  • This is a normal and well understood physical effect called negative excess volume.
  • This occurs because alcohol and water molecules attract each other very strongly when mixed.
  • As a result, the molecules pack together more tightly than they do when separate, causing the mixture to shrink slightly in volume.

Why is this important?

  • Micronclean’s alcohol disinfectants are labelled as 70% v/v (volume/volume).
  • This means that the 70% alcohol and 30% water are measured by volume and not by weight (some regulations may ask for %w/w, even though this is not as accurate).
  • Because of the ‘negative excess volume effect’, a 70% alcohol solution by volume is not the same as 70% by weight, and a simple density calculation cannot be used to correctly calculate the %w/w.

What are the alcohol contents?

 

%v/v

%w/w

Isopropyl alcohol in IPA

70

62.76

Denatured ethanol in IMS

70

62.4*

Ethanol in IMS

66.5

59.3*

(only correct at 20oC);  *approximate

 

Key Points

  • Alcohol disinfectant labels and specifications are correct when stated as 70% v/v.
  • Weight percentages will always appear lower, due to density differences and negative excess volume, as described above.
  • This does not affect disinfectant performance.
  • This behaviour is standard across the cleanroom industry.
  • A 70% v/v alcohol disinfectant contains the correct amount of alcohol for effective, optimal disinfection.
  • Differences between volume and weight based percentages are a normal physical property of alcohol water mixtures and are not a quality issue.

TKN01: Alcohol Water Mixtures by Tasmin Crompton - Technical Lead